Produkte

1 2 3 4

Weiter

size 104.27-CCPZPA

Crimping tool with automatic positioner

Daniels WA27FAP (inserts excluded)

size 104.27-CCPNP

"go /no go" control gauge to verify indenter closure

size 104.27-CIF 2.4

Interface for printed circuit with 6 female contacts (gold)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

size 104.27-CGCP 24 MB

Dust protection cover for hoods high protection IP68

size 104.27-CR 24 ST

Ground terminals for shielded cables

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

THCC 24 G

Covers with 2 thermoplastic levers and gasket

Plastic, with loop

CRN 2

Gaskets for ribbon cable hood

one slot for cable sizes 63.8 x 5.1 mm

CCW PD 24

Punching units for panel cut out of bulkhead mounting houdings

CGD 16 C

Crimp matrixes for CG contacts with 16 mm² section

size 104.27 72-CRF

Female coding and guide pin, for 72 codes

CRH 24

24 pole closure or reduction plate

In autoextinguishing thermoplastic resin with gasket in vinil-nitrile elastomer

Protection degree: IP65

CR 24 SS

Grip panels for cables outside enclosures equipped with fixing screws and rings

For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts

CGC 24 B

Cover for bayonet locking

Aluminium

CHC 24 G

Covers with 2 levers

For hoods with 4 pegs

CG 24 FL

Frame for bulkhead mounting housings

Aluminium

CHC 24 LG

Covers with 1 lever

For hoods with 2 pegs

size 104.27-CCTPACF

Positioner inserts female contacts 16A

size 104.27-CCPR RN

Replacement tip for CCES removal tool

size 104.27-CIF 2.4 A

Interface for printed circuit with 6 female contacts (silver)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

CBGF

Insert joining block

Made of die cast aluminium alloy to mate 2 inserts

size 104.27-CR 24 AT

Anchorages for several earth connections cables

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

CR 24 BPE

Galvanized brass

CRN 3

Gaskets for ribbon cable hood

one slot for cable sizes 36 x 9 mm

CGD 25 C

Crimp matrixes for CG contacts with 25 mm² section

size 104.27-CR 72

Single coding and guide pin, for 72 codes

size 104.27-CR VNTG

Screws for second earth terminal

For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts

size 104.27-CR SP

Supports for grip panels of cables outside enclosures

In die-cast zinc N° 2 pieces

size 104.27-CR 26 V

Short screws for grip panels of cables outside enlcosures

In zinc iron, N° 2 pieces

CHCN 24

Covers with pegs

Aluminium

C7 24 FL-N

Frames for bulkhead mounting housings

1 2 3 4

Weiter