Connectors

Products

Show 30 50 100 per page
1 2
Next
size size 57.27mixo...
Male coding and guide pin, for 72 codes
size 57.27mixo-CR 42 V
Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size size 57.27mixo...
    Female coding and guide pin, for 72 codes
    CR..SSsize 57.27mixo-CR...
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 57.27mixo-C7ES
    Removal tool for 70A CX7 series contact
    size 57.27mixo-CR 72 CX
    Single coding and guide pin, for 72 codes
    size 57.27mixo-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 57.27mixo-CX7PZ LOC
    Locator for CX7 contacts
    size 57.27-CW 0,5 JM4/2
    Patch cord with 1 RJ 45 male connector
  • With 4 data contacts/ 2 power contacts
    • size 57.27-CJPZ T
    RJ45 CJ series plug insert crimp pliers
    size 57.27-CW 0,5 JM8
    Patch cord with 1 RJ 45 male connector
  • with 8 data contacts
    • size 57.27mixo-CR 20 CX
    Single code pins for 6 codings
    size 57.27mixo-CRF CX
    Male double coding and guide pins, for 16 codes
    size 57.27mixo-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 57.27-CW 0,5 JM4E
    Patch cord with 1 RJ 45 male connector
  • with 4 data contacts, class 5e
    • size 57.27-CJPW K
    Manual IDC wrenches pliers for CX 8 J6IM
    size 57.27mixo-CRM CX
    Female double coding and guide pins, for 16 codes
    size 57.27mixo-CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 57.27mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 57.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    size 57.27-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 57.27mixo-CYPZ LOC
    Locator for CY contacts
    size 57.27mixo-CITP D
    Turret head for CI contacts
    size 57.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    size 57.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 57.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 57.27-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 57.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 57.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 57.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 57.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 57.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CLSP
    Fibre stripper for POF fibre optic
    size 57.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 57.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27mixo-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 57.27-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 57.27mixo-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 57.27mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 57.27mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 57.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CR 10 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 57.27 and Mixo frames for 3 inserts
    • size 57.27-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    size 57.27mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 57.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 57.27mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 57.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27-CR GND
    Metal adaptor
    size 57.27mixo-CR 10 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 57.27mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 57.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 57.27mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 57.27-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 57.27-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 57.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 57.27mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 57.27mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 57.27mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 57.27mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 57.27-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CR 10 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CLC1
    Polish paper grain size 1000
    size 57.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 57.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 57.27-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 57.27mixo-CCVPP
    Pneumatic foot valve
    size 57.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 57.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 57.27mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 57.27-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CR 10 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 57.27mixo and mixo frames for 3 inserts
    • size 57.27-CLC4
    Polish paper grain size 4000
    size 57.27mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 57.27mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 57.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 57.27-CW 1 J2M87
    Patch cord RJ45 with 2 RJ45 male connectors
  • with 8 data contacts
    • size 57.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 57.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 57.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 57.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5mm
    • size 57.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CLDL
    Polishing disc for POF and MOST contacts
    size 57.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 57.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 57.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 57.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 57.27mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 57.27mixo-CGPZ LOC
    Locator for CG contacts
    size 57.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 57.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 57.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 57.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    size 57.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 57.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 57.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • Show 30 50 100 per page
    1 2
    Next