A&C Solutions - Products: Connectors

Plastic protective cap

For connectors with female thread

Positioner inserts female contacts 16A

Interface for printed circuit with 6 female contacts (silver)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

Covers with 2 levers

For hoods

Crimp matrixes for CG contacts with 16 mm² section

Grommets and reductions

2 holes Ø 3,3 mm

Cable diameter range: 2,0 - 4,0 mm

Plastic protective cap

For connectors with male/female thread

Bridge for delta connection

With 2 female 10 A contacts, silver plated and open type crimp barrel

Jacket stripper for POF and MOST fibre optic with PA jacket

insertion tool for insertion of the contacts into the inserts

And removal tool for the extraction of contacts from the insert for CI contacts

panel mounting clip

Turret heads for 10 A contacts (CDF & CDM series)

Grommet and reductions

slot 11,0 mm x 5,5 mm, Yellow

Brass protective cap with chain

For connectors with female thread

Locator for CY contacts

Removal tools for the extraction of contacts from the insert

For 10 A contacts

modules adapter for 6 poles version with silicon belt

6A male contacts for male inserts with terminal Ø 1mm

Type of connection: Crimp connection

Rated current: 6 A

Blind grommet

white

RJ 45 female connector with 4 data contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

Positioner inserts female contacts 16A

Turret head for CI contacts

modules adapter for 3 poles version

RJ45 female connector with 8 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

blind reduction

Natural

Grip panels for cables outside enclosures equipped with fixing screws and rings

For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts

Locator for CG contacts

Replacement tip for CCES removal tool

Patch cable USB-A/USB-A, 2 meter

Lock nuts

CH 24,0 mm, 14,0 mm (h=21,0 mm)

Clamps for shielding cables

To be mounted on CR..ST ground terminals

screw ∅ 2,9 x 25,0 mm for box fixing

Long screws for grip panels of cables outside enlcosures

In zinc iron, N° 2 pieces

Interface for printed circuit with 6 female contacts (gold)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

Positioner inserts male contacts 10A

cable reduction suggested for silicon-rubber and ∅ ≤7.0 mm cables

Positioner inserts female contacts 16A

Lock nuts

11,0 mm, CH 24,0 mm

Covers with pegs

Aluminium

Seat for two shielded connectors

Male inserts, two seats for BUS connectors

Rated current: 10 A

Nominal rated voltage: 50 V

Insertion tool for insertion of the contacts into the inserts

For crimped contacts up to 0.75 mm²

Grommets and reductions

2 holes Ø 3,4 mm

Cable diameter range: 2,5 - 3,0 mm

Adaptor flange for Straight Connectors

Replacement tip for CCES removal tool

cable reduction suggested for silicon-rubber and ∅ ≤ 7,5 mm cables

Covers with 4 pegs

Plastic, with eyelet

cover for male mini F connector

Rated current:
Number of contacts of range: 2 - 9

Connector diameter:
Protection degree:

Lock-in tabs for modular units (6units) dividable

Support for rail mounting DIN EN 60715

For CT,CTS,CTSE

cable reduction suggested for silicon-rubber and ∅ ≤ 7.0 mm cables

Stainless steel protective cap

For connectors with male thread
with rope, length 100 mm

Interface for printed circuit with 6 female contacts (silver)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

Grommets and reductions

5 holes Ø 3 mm

Cable diameter range: 1,5 - 3,5 mm

Support for CCPZP pneumatic crimping tool

U-bolt for cable screening

To be fitted on CR..SC anchors

Crimping tool for POF CX PL and MOST CX ML contacts

RENNSTEIG model

Grommets and reductions

hole Ø max 8,5 mm

Cable diameter range: 7,0 - 9,0 mm

Crimp tool for manual crimping of machined crimp contacts up to 10 mm² (AWG 8)

For power connectors

Jacket stripper for POF and MOST fibre optic with PA jacket

Grommets and reductions

1 hole Ø 3,2 mm

Cable diameter range: 1,5 - 4,5 mm

Single coding and guide pin, for 72 codes

Bulkhead mounting housings with double lever

Aluminium

Locking Mecahnism: Double locking levers

Position cable feed: Below

Material housing: Aluminium

Protection degree: IP65

Crimp matrixes for CY contacts section 16mm²

Grommets and reductions

2 holes Ø max 5,3 mm

Cable diameter range: 4,5 - 5,5 mm

Brass protective cap

For connectors with female thread

Removal tools for the extraction of contacts from the insert

For 16 A contacts

Screws for second earth terminal

For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts

"go/no go" control gauge to verify indenter closure

for 10A,16A,40A contacts

Blind grommet

Yellow

Brass protective cap

For connectors with male thread

Single code pins for 6 codings

Positioner inserts female contacts 10A

Removal tools for the extraction of contacts from the insert

For 40A contacts and cables Ø < 5 mm

additional cable retention Only for 24.0 mm

Extraction tool for Mixo Bus connector

For the extraction of he BUS shielded connectors from the MIXO BUS insert

Grommets and reductions

hole Ø 8,5 mm

Cable diameter range: 7,5 - 9,0 mm

Crimp tool for manual crimping of machined crimp contacts

For signal connectors M16 and M23

Polishing disc for POF and MOST contacts

Crimp matrixes for CX7 contacts with 10mm² section

modules adapter for 5 poles version

Grommets and reductions

slot 11,0 mm x 5,5 mm

Crimp matrixes for CY contacts section 50mm²

Turret heads for female contacts 40A

RJ45 female connector with 4 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

sealing cap

RJ45 male IDC connector

8 data contacts

Locknut

M20 x 1,5 mm, CH 27,0 mm

Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures

Protection degree: IP65

Lock-in tabs for modular units (6units) dividable

Lock nuts

CH 24,0 mm, 11,0 mm

Covers with 4 pegs and gasket

For enclosures with 2 levers

Lock nuts

spiral top ∅ 12,5 mm, CH 24,0 mm

Anchorages for several earth connections cables

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

RJ45 male connector with 6 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

"go/no go" control gauge to verify indenter closure

for 10A,16A,40A contacts

Grommets and reductions

3 holes Ø 3,4 mm

Cable diameter range: 2,5 - 3,0 mm

Crimp matrixes for CG contacts with 25 mm² section

Lock nuts

CH 19,0 mm, 9,5 mm

Cover with 2 levers

For enclosures with 4 pegs

Male coding and guide pin, for 72 codes