Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
24 25 26 27 28
Suivant
CKAXR 03 VG
Hoods with stainless steel lever
  • Top entry
    • Locking Mecahnism: Single locking lever
    Position cable feed: Top entry
    Material housing: Zinc
    Protection degree: IP44
    MZOW 15 L20
    Hoods with pegs
  • Side entry
    • Locking Mecahnism: Single locking lever
    Position cable feed: Side entry
    Material housing: Aluminium
    Protection degree: IP66
    MZAVW 25 L25
    Hoods with pegs, high construction
  • Top entry
    • Locking Mecahnism: Single locking lever
    Position cable feed: Top entry
    Material housing: Aluminium
    Protection degree: IP66
    CKAS 03 V
    Hoods with pegs
  • Top entry
    • Locking Mecahnism: Single locking lever
    Position cable feed: Top entry
    Material housing: Zinc
    Protection degree: IP44
    CAV 06 L21
    Hoods with 2 pegs, high construction
  • Top entry
    • Locking Mecahnism: Single locking lever
    Position cable feed: Top entry
    Material housing: Aluminium
    Protection degree: IP66
    size 32.13-CCF2D 0.3
    16 A female crimp contacts
  • High thickness gold plating
    • Type of connection: Crimp connection
    MZAV 25 L220
    Hoods with 2 pegs for 1 lever
  • Double top entry
    • Locking Mecahnism: Single locking lever
    Position cable feed: Top entry
    Material housing: Aluminium
    Protection degree: IP66
    size 44.27mixo-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • MKAX VG20
    Hoods, with stainless steel lever
  • Top entry
    • Locking Mecahnism: Single locking lever
    Position cable feed: Top entry
    Material housing: Zinc
    Protection degree: IP44
    CHP 06 L
    Surface mounting housings
  • With single lever
    • Locking Mecahnism: Single locking lever
    Position cable feed: Side entry
    Material housing: Aluminium
    Protection degree: IP66
    CQM 04/2
    Inserts 4P+2P+PE , crimp connections
  • Male inserts for male contacts
    • Type of connection: Crimp connection
    Rated current: 4 poles: 40A 2 poles: 10 A
    Nominal rated voltage: 4 poles: 400/690V 2 poles: 250 V
    CZI 25 LS
    Bulkhead mounting housings
  • With single lever and cover
    • Locking Mecahnism: Single locking lever
    Position cable feed: Below
    Material housing: Aluminium
    Protection degree: IP66
    MKAX IAF20
    Angled bulkhead mounting housings
  • Stainless steel lever
    • Locking Mecahnism: Single locking lever
    Position cable feed: Side entry
    Material housing: Steel
    Protection degree: IP44
    size 66.40-CCFJD 0.3
    16 A female crimp contacts
  • Basic gold plated
    • Type of connection: Crimp connection
    CQ 08 I
    Bulkhead mounting housings with single lever
  • Plastic
    • Locking Mecahnism: Single locking lever
    Position cable feed: Below
    Material housing: Plastic
    Protection degree: IP66
    size 49.16-CCMA 0.3
    16 A male crimp contacts for normal opening
  • Silver plated
    • Type of connection: Crimp connection
    Rated current: 16 A
    CKG 03 VN
    Black hood with pegs and gasket
  • Top entry
    • Locking Mecahnism: Single locking lever
    Position cable feed: Top entry
    Material housing: Plastic
    Protection degree: IP44
    size 66.40-CDDF 38
    Inserts, 76P + PE, Crimp connections
  • Female inserts for female contacts
    • Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 250 V
    size 21.21-CCMD 0.3
    16 A male crimp contacts for normal opening
  • Gold plated
    • Type of connection: Crimp connection
    Rated current: 16 A
    CDF 15
    Inserts, 15P + PE, crimp connections
  • Female inserts for female contacts
    • Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 250 V
    MAV 50 X25
    Hoods with 2 levers, high construction
  • Top entry
    • Locking Mecahnism: Double locking levers
    Position cable feed: Top entry
    Material housing: Aluminium
    Protection degree: IP66
    size 21.21-CX 01 BM
    Shielded BUS coaxial connectors, 1 pole + shield, 10 A
  • Male insert, one contact seat + shield
    • Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 50 V
    CX 75 M
    Male Coaxial contacts 75Ω
    Type of connection: Other
    Rated current: 1.5 A
    Nominal rated voltage: 50 V
    MAO 50.25
    Hoods with 4 pegs, high construction
  • Side entry
    • Locking Mecahnism: Double locking levers
    Position cable feed: Side entry
    Material housing: Aluminium
    Protection degree: IP66
    CLK 04 SCF
    Adaptor female insert with seats for 4 SC contacts
  • With ceramic sleeve
    • Type of connection: Crimp connection
    size 49.16 mixo-CCFA 0.3
    16 A female crimp contacts for normal opening
  • Silver plated
    • Type of connection: Crimp connection
    Rated current: 16 A
    size 57.27mixo-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 49.16-CX 17 DM
    Modular units 17P, crimp connections
  • Male inserts for male contacts
    • Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 160 V
    size 66.16-CDM2D 0.3
    10 A male crimp contacts
  • High thickness gold plating
    • Type of connection: Crimp connection
    CKM 03 RY
    Inserts 3P+PE for 180 °C, screw terminal connector
  • Male inserts with male contacts
    • Type of connection: Screw connection
    Rated current: 10 A
    Nominal rated voltage: 230/400 V
    size 49.16-CX 01 9VM
    Module adaptor for 1 D-sub connector, 9P
  • Crimp connector and shield
    • Type of connection: Crimp connection
    Rated current: 5 A
    Nominal rated voltage: 50 V
    size 49.16-CX 02 4AM
    Modular units 2P, screw connection
  • Male inserts with male contacts
    • Type of connection: Axial screw connection
    Rated current: 40 A
    Nominal rated voltage: 1000 V
    CDCF 16
    Inserts, 16P + PE, crimp connections
  • Female inserts for female contacts
    • Type of connection: Crimp connection
    Rated current: 16 A
    Nominal rated voltage: 250 V
    size 21.21-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 57.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 104.62-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    CLDL
    Polishing disc for POF and MOST contacts
    size 77.27mixo-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 77.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CKA 03 CA
    Covers, with 2 pegs
  • for male inserts
    • size 57.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.62mixo-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • size 49.16mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 77.27-CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • CHC 32 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 77.27-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 57.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 77.62-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 49.16mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    CG 16 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 77.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 66.40-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.62 72-CRF
    Female coding and guide pin, for 72 codes
    size 104.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    C7 16 FL-N
    Frames for bulkhead mounting housings
    CCW PD 03G
    Punching units for panel cut out of bulkhead mounting houdings
  • For CKG IP68 enclosures
    • size 104.62-CR 20
    Single code pins for 6 codings
    size 66.40-CR CP
    Plain coding pin for CD and CDD inserts
    size 104.27mixo-CR 24 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • size 32.13-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 57.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CCW CT
    Hydraulic punching tool
    size 104.62-CLDL
    Polishing disc for POF and MOST contacts
    size 104.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 66.16-CCTPACF
    Positioner inserts female contacts 16A
    size 77.27mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 77.62mixo-CCVPP
    Pneumatic foot valve
    size 104.27-CGCP 24 FX
    Dust protection cover for housings high protection IP68
    size 32.13-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 57.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 104.62mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 104.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 66.16-CR CP
    Plain coding pin for CD and CDD inserts
    size 77.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.62mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 104.27-COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 57.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 104.62mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 104.27-CRAD
    Straight cable clamping plate
    CZC 25 SL
    Covers, with 2 pegs
  • For 1 lever enclosures
    • size 77.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 77.62mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    THCH 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • CKM 03 T3
    Terminal connector for CKF 03 inserts
  • With pegs and seal, connects pole 1 with pole 2
    • Rated current: 10 A
    Nominal rated voltage: 250 V
    Locking Mecahnism: Double locking levers
    Material housing: Plastic
    Protection degree: IP44
    size 57.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 104.62mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.27-CLC4
    Polish paper grain size 4000
    size 49.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CRN 1
    Gaskets for ribbon cable hood
  • one slot for cable sizes 18.8 x 5.8 mm
    • CWK 10 J2M8
    Patch cord with 2 RJ45 connectors, male inserts
  • 8 data contacts, in insulating enclosure
    • Protection degree: IP65
    size 57.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 104.62-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 104.27mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 77.27-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 77.62-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    Montrer 30 50 100 par page
    Précédente
    24 25 26 27 28
    Suivant