Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
25 26 27 28 29
Suivant
size 49.16mixo-CR CPQ
Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
size 104.62-CLPZ R
Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • CR 10 BPE
    PE jumpers
  • Galvanised brass
    • size 66.40-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CLSP
    Fibre stripper for POF fibre optic
    COB L
    Levers for coupling with metallic enclosures
  • Kit with 2 element, to be mounted instead of the standard levers to be coupled with: COB TCQ and COB..BC
    • size 104.62mixoCY-CGD 25...
    Crimp matrixes for CY contacts section 16mm²
    size 77.62mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • CHC 10
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 104.27-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CHCW 50
    Cover with 4 pegs
  • For housings with 2 levers
    • CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 32.13-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 104.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 44.27-CCPR RN
    Replacement tip for CCES removal tool
    size 66.16-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CYG 06H06
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "44.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    CQ 08 C
    Covers with 2 pegs
  • Thermoplastic resin cable glands
    • size 104.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 104.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CRAS
    Angled cable clamping plate
    CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 66.16-CR VDTG
    Screws for second earth terminal
  • For C15/25 & CDD 38 inserts
    • THCC 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 104.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.62-CR GND
    Metal adaptor
    size 44.27-CLDL
    Polishing disc for POF and MOST contacts
    size 104.27-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 49.16-CCVPP
    Pneumatic foot valve
    CRIC M3
    Panel fitted insert fastening screws
    size 104.62-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 104.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CCW M25
    Punching nut for M25 hole
    CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    CR 24 BPE
    PE jumpers
  • Galvanized brass
    • size 49.16 72-CRF
    Female coding and guide pin, for 72 codes
    size 21.21-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 77.62-CCTPACM
    Positioner inserts male contacts 16A
    size 57.27-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 104.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 66.16-CCW CT
    Hydraulic punching tool
    size 44.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • CRN 3
    Gaskets for ribbon cable hood
  • one slot for cable sizes 36 x 9 mm
    • CLDL
    Polishing disc for POF and MOST contacts
    CKA 03 CA
    Covers, with 2 pegs
  • for male inserts
    • size 77.62-CR BST
    Bridge for star connection
  • With 3 female 10 A contacts, silver plated
    • size 57.27-CGCP 10 MB
    Dust protection cover for hoods high protection IP68
    size 104.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    size 44.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CXTP 40 F
    Turret heads for female contacts 40A
    size 49.16mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 104.62-CR 72
    Single coding and guide pin, for 72 codes
    size 77.62-CR VPTG
    Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • size 57.27-CYG 06H0610
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 1 "57.27" size fixing side housing and one "44.27" size enclosure
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 44.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 77.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 49.16mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.62-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 77.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    CGC 10 B
    Covers for bayonet locking
  • Aluminium
    • size 104.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 66.40-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 44.27-CHES
    Contact holder removal tool
    size 77.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.62mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.62mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    CR 10 MO
    Flange gasket
    size 104.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 66.40-CR CP
    Plain coding pin for CD and CDD inserts
    CR 09 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 32.13-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 104.62mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 77.62mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 44.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 104.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 66.16-CCTPACF
    Positioner inserts female contacts 16A
    CR 06 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 32.13-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.62mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 44.27-CR 72
    Single coding and guide pin, for 72 codes
    size 104.27mixo-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 66.16-CR CP
    Plain coding pin for CD and CDD inserts
    CGC 06
    Cover for Screw locking
  • Aluminium
    • CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.62mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 77.62-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • CZC 25 SL
    Covers, with 2 pegs
  • For 1 lever enclosures
    • CGC 16 B
    Covers for bayonet locking
  • Aluminium
    • size 104.62-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CHC 16 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 57.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.27mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 57.27 72-CRM
    Male coding and guide pin, for 72 codes
    Montrer 30 50 100 par page
    Précédente
    25 26 27 28 29
    Suivant