Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
32 33 34 35 36
Suivant
size 57.27mixo-CYD 50 C
Crimp matrixes for CY contacts section 50mm²
size 104.27mixo-CIF 2.4
Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 77.27mixo-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.27-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 104.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 104.62-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.27mixo-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.62-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 77.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 104.62-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 57.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 104.27-CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • CHC 32 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • CGC 16 B
    Covers for bayonet locking
  • Aluminium
    • size 104.27-CR 72
    Single coding and guide pin, for 72 codes
    size 77.62-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • CHCN 24
    Covers with pegs
  • Aluminium
    • CHC 16 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 104.27-CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • size 77.62 72-CRM
    Male coding and guide pin, for 72 codes
    C7 24 FL-N
    Frames for bulkhead mounting housings
    size 104.62-CRAD
    Straight cable clamping plate
    size 57.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 77.27-CCTPACF
    Positioner inserts female contacts 16A
    size 77.27mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 104.62-CLC4
    Polish paper grain size 4000
    size 57.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 104.27mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 77.62mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.27mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 104.62mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 104.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    size 77.62mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 77.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.27mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 49.16mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • C7ES
    Removal tool for 70A CX7 series contact
    size 57.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 49.16mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 44.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 66.40-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • CR 25 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
  • 25 poles
    • Protection degree: IP65
    CZCS 15 L
    Cover for electromagnetic compatibility with pegs
  • For 1 lever enclosures
    • size 44.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CHC 50 S
    Covers with 4 pegs
  • For enclosures with 2 levers
    • CR 10 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 32.13-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 44.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 66.16-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27-CHC 10 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • AL M25DN
    Insulating black sealing plug M25
    size 44.27-CR GND
    Metal adaptor
    CR 37 AD
    Plates for 1 D-sub insert, CZ/MZ/MZF enclosures
    Protection degree: IP65
    CCW PD 03G
    Punching units for panel cut out of bulkhead mounting houdings
  • For CKG IP68 enclosures
    • size 104.62-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • TCHC 10 S
    Covers with 4 pegs
  • Plastic,with loop
    • CCPR RN
    Replacement tip for CCES removal tool
    size 44.27mixo-CR 06 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 49.16-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CCW CT
    Hydraulic punching tool
    size 44.27-CCTPACF
    Positioner inserts female contacts 16A
    CX 1/2 BDF
    Adaptor female insert, 1 seat for BUS connector and 2 seats for 10 A female contacts
    Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 50 V
    CR 06 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • CRF
    Female double coding and guide pins, for 16 codes
    size 44.27-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CHCN 06 L
    Covers with pegs
  • Aluminium
    • CLC1
    Polish paper grain size 1000
    size 44.27-CRIC M3
    Panel fitted insert fastening screws
    CKAG 03 C
    Cover with pegs and gasket
    TCHC 06 L
    Covers with pegs
  • With eyelet
    • CIVTP D
    Turret head for 5A D-SUB contacts
    size 44.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 49.16mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 44.27mixoCX7-CGD 16...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 66.40-CCTPADF
    Positioner inserts female contacts 10A
    size 44.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 66.40 72-CRF
    Female coding and guide pin, for 72 codes
    CR..SSsize 57.27-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 32.13-CCTPADF
    Positioner inserts female contacts 10A
    size 66.16-CCVPP
    Pneumatic foot valve
    size 57.27-COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 32.13-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 44.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 66.16 72-CRF
    Female coding and guide pin, for 72 codes
    CHCS 10
    Cover for electomagnetic compatibility with pegs
  • For 1 lever enclosures
    • CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 44.27mixo-CR 06 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 44.27 and Mixo frames for 2 inserts
    • size 49.16-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 66.16-CCW M25
    Punching nut for M25 hole
    size 104.62-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CHC 10 C
    Covers with 4 pegs and gasket
  • For enclosures with 2 levers
    • CR Q12
    Plain coding pin for CQ 12 inserts
    CHCP 06
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • Montrer 30 50 100 par page
    Précédente
    32 33 34 35 36
    Suivant