Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
58 59 60 61 62
Suivant
size 57.27mixo-CIPZ D
Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 44.27-CLC4
    Polish paper grain size 4000
    size 77.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62-CLDL
    Polishing disc for POF and MOST contacts
    size 104.62mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 57.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 77.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 77.62mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 77.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 57.27mixo-CR 10 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 57.27 and Mixo frames for 3 inserts
    • size 104.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 57.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 44.27mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 77.62mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • CGC 16 B
    Covers for bayonet locking
  • Aluminium
    • size 57.27-CGCP 10 FX
    Dust protection cover for housings high protection IP68
    size 44.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.27-CCTPACM
    Positioner inserts male contacts 16A
    CHC 16 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 57.27-CYG 06H0606
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 1 "44.27" size fixing side housing and one "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    CPT 24
    Temporary protection cover for transportation
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • size 77.62-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 104.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • CGC 10
    Cover for screw locking
  • Aluminium
    • size 104.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 104.62-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 44.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 77.62-CHES
    Contact holder removal tool
    size 77.27mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 104.27-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 57.27 72-CRM
    Male coding and guide pin, for 72 codes
    C7 10 FL-N
    Frames for bulkhead mounting housings
    CHCW 24 G
    Cover with 2 levers
  • For enclosures with 4 pegs
    • size 104.62mixo-CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CR 09 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    CHC 32 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 77.27mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 104.27-CLSP
    Fibre stripper for POF fibre optic
    size 44.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • CHC 24
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 77.62-CCVPP
    Pneumatic foot valve
    CYG 06H1010
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 57.27mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 44.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 77.27-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • Montrer 30 50 100 par page
    Précédente
    58 59 60 61 62
    Suivant