Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
64 65 66 67 68
Suivant
size 44.27mixo-CXTP 40 F
Turret heads for female contacts 40A
size 104.27mixo-CXPNP
"go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 104.62-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 77.27-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 77.27-CRAD
    Straight cable clamping plate
    size 77.62-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 57.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 57.27mixo-CGPZ LOC
    Locator for CG contacts
    size 77.62-CCTPADM
    Positioner inserts male contacts 10A
    size 77.27-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 77.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 57.27-COB TCQ
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
    size 57.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 44.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.27-CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • CHCW 10 G
    Cover with 4 pegs
  • For enclosures with 2 levers
    • size 104.62-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 77.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • CYG 16
    Enclosures for in-line joints IP65
  • Without housings made in two halves
    • Material housing: Aluminium
    Protection degree: IP65
    CHC 10 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 104.27-CCVPP
    Pneumatic foot valve
    size 57.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    CR 06 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 44.27 and Mixo frames for 2 inserts
    • size 104.27-CGCP 24 MB
    Dust protection cover for hoods high protection IP68
    size 77.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • CR 16 BPE
    PE jumpers
  • Galvanised brass
    • size 44.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 104.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.62mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CYG 06H10
    1 branch-off T-Box coupling to be fitted on DIN rails
  • For 2 hoods with lever and gasket "44.27" size and one housing "44.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.62mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 57.27-CCTPADM
    Positioner inserts male contacts 10A
    CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 104.27-CRAS
    Angled cable clamping plate
    size 104.62mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 77.27mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • CHCW 06 L
    Cover with pegs
  • For 1 lever enclosures
    • THCC 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 77.62mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 57.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 44.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.27-CLDL
    Polishing disc for POF and MOST contacts
    size 104.62mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • size 77.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    CRN 2
    Gaskets for ribbon cable hood
  • one slot for cable sizes 63.8 x 5.1 mm
    • size 77.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • Montrer 30 50 100 par page
    Précédente
    64 65 66 67 68
    Suivant