Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
73 74 75 76 77
Suivant
CCPR RN
Replacement tip for CCES removal tool
size 77.27mixo-CCTP 16
turret heads for 16 A contacts (CCF & CCM series)
size 57.27-CYG 06H0606
2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 1 "44.27" size fixing side housing and one "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 57.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.62-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 104.27-CRIC M3
    Panel fitted insert fastening screws
    size 49.16-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.62-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • CX 1/2 BDF
    Adaptor female insert, 1 seat for BUS connector and 2 seats for 10 A female contacts
    Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 50 V
    CGC 10
    Cover for screw locking
  • Aluminium
    • size 57.27mixo-CYPZ LOC
    Locator for CY contacts
    size 77.62-CCTPADM
    Positioner inserts male contacts 10A
    size 44.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 104.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    CRF
    Female double coding and guide pins, for 16 codes
    size 77.27-CCTPACM
    Positioner inserts male contacts 16A
    CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    C7 10 FL-N
    Frames for bulkhead mounting housings
    size 57.27mixo-CITP D
    Turret head for CI contacts
    size 77.62-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • CR 09 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 104.27mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    CLC1
    Polish paper grain size 1000
    size 77.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CKAG 03 C
    Cover with pegs and gasket
    size 77.27mixo-CR 16 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 104.62-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 44.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 57.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    size 77.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • CYG 06H1010
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    CIVTP D
    Turret head for 5A D-SUB contacts
    size 77.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.62-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 44.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 57.27mixo-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • CZCR 06 LG
    Cover with lever
  • For hoods
    • size 49.16mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    CHCN 16
    Covers with pegs
  • Aluminium
    • size 104.62mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 44.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 66.40-CCTPADF
    Positioner inserts female contacts 10A
    size 57.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 77.62mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    Montrer 30 50 100 par page
    Précédente
    73 74 75 76 77
    Suivant