Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
114 115 116 117 118
Suivant
size 104.62-CX 4 JM
RJ45 male connector with 4 data contacts
Type of connection: Crimp connection
Rated current: 1.4 A
Nominal rated voltage: 50 V
size 49.16mixo-CCES
Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 57.27mixo-CR 10 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CCPR RN
    Replacement tip for CCES removal tool
    size 77.62-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 44.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 66.40-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 104.62-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • CR 09 AD
    Plates for 1 D-sub insert, CZ/MZ/MZF enclosures
    Protection degree: IP65
    size 57.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 57.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CHCW 32 G
    Cover with 2 levers
  • For enclosures with 4 pegs
    • CHCW 50 G
    Covers with 2 levers
  • For enclosures with 4 pegs
    • size 77.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 77.62-CCTPACF
    Positioner inserts female contacts 16A
    size 32.13-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CHCN 10 G
    Covers with 2 levers
  • Aluminium
    • size 57.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.27-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 104.27-CCTPADM
    Positioner inserts male contacts 10A
    SDS
    Kit for control equipment plate only
  • With Schuko socket, 16 A and 2 seats for: CR 09 AD, CR 15 AD, CR 25 AD plated
    • Protection degree: IP65
    size 104.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CR 24 SCA
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • size 104.27-CR 20
    Single code pins for 6 codings
    CHCR 24
    Cover with 4 pegs
  • For housings
    • size 104.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    CHC 24 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 104.27mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • Montrer 30 50 100 par page
    Précédente
    114 115 116 117 118
    Suivant