Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
34 35 36 37 38
Suivant
size 49.16-CCPR RN
Replacement tip for CCES removal tool
size 104.62mixo-CIF 2.4
Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • CW 1 SC62
    SC duplex patch cord GL fibre G62,5/125 Orange
    size 77.62-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR 16 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 104.62-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CX CFM
    Lock-in tabs for modular units (6units) dividable
    CGC 16
    Covers for screw locking
  • Aluminium
    • size 49.16mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.62-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 57.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    CK 03 C
    Covers, with 2 pegs and gasket
  • For female inserts
    • CCW PD 24
    Punching units for panel cut out of bulkhead mounting houdings
    size 104.27-CCTPADM
    Positioner inserts male contacts 10A
    CHC 16 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • size 49.16mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.62-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CR 25 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
  • 25 poles
    • Protection degree: IP65
    size 49.16-CCW M25
    Punching nut for M25 hole
    size 104.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 57.27-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 49.16mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 77.62-CRAD
    Straight cable clamping plate
    CR 10 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • AT U3F
    RJ45/USB/LC Connectors for ATR C22
  • USB 3.0 coupler F-F Type A
    • size 104.27-CR 20
    Single code pins for 6 codings
    size 57.27-CRF
    Female double coding and guide pins, for 16 codes
    CZCS 15 LG
    Cover for electromagnetic compatibility with lever
  • For enclosures with pegs
    • size 77.62-CLDL
    Polishing disc for POF and MOST contacts
    size 57.27-CHC 10 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 104.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 57.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 32.13-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 77.62mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 57.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • AL M25IN
    Insulating black cable glan M25
    size 77.62mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 66.40-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    CX7PZ LOC
    Locator for CX7 contacts
    CR LN
    Spare part lever for enclosures with levers
    CHCW 50 G
    Covers with 2 levers
  • For enclosures with 4 pegs
    • size 44.27mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • TCHC 24 S
    Covers with 4 pegs
  • Plastic, with loop
    • size 66.16-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 44.27-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 77.27-CCTPADF
    Positioner inserts female contacts 10A
    size 66.16-CRIC M3
    Panel fitted insert fastening screws
    size 104.27mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 104.62-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 104.27mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 104.62-CR 72
    Single coding and guide pin, for 72 codes
    size 77.27-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    CHC 10 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 104.27mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.62-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 44.27-CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 44.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.27-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 104.62mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CYG 06H1006
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 2 "44.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27mixo-CCVPP
    Pneumatic foot valve
    size 44.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 104.27mixo-CR 24 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 104.27 and Mixo frames for 6 inserts
    • size 104.62mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    CHCR 06 L
    Cover with pegs
  • For housings
    • size 77.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    55 20 Z4T
    Socket head cap screw ISO4762 fitting for diecast hoods
  • Length is 20,7 mm
    • CPES
    Pliers for uncoupling connectors
  • For housings and hoods with 2 levers and 4 pegs
    • CHC 06 LG
    Covers with lever
  • For hoods with pegs
    • size 77.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 44.27mixo-CCVPP
    Pneumatic foot valve
    size 104.27-CR 24 SC
    Ground terminals for shielded cables and for several earth connections clams
  • In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
    • size 66.40-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 44.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    CHCS 24 G
    Cover for electromagnetic compatibility with 2 levers
  • For enclosures with 4 pegs
    • size 66.16-CCTPACM
    Positioner inserts male contacts 16A
    size 44.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    CHC 24 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 66.16-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.27mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • CZC 25 LG
    Covers, with lever
  • For enclosures with pegs
    • size 104.27mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 104.62-CCPR RN
    Replacement tip for CCES removal tool
    size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.27-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • size 104.27mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 104.62-CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • size 77.27-CRIC M3
    Panel fitted insert fastening screws
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    size 104.27mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 104.62-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 77.27-CLC1
    Polish paper grain size 1000
    size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • Montrer 30 50 100 par page
    Précédente
    34 35 36 37 38
    Suivant