Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
58 59 60 61 62
Suivant
size 32.13-CCPR RN
Replacement tip for CCES removal tool
size 77.27mixo-CCTPADF
Positioner inserts female contacts 10A
size 104.27-CW 2 UAM
Patch cable USB-A/USB-A, 2 meter
CCTPACF
Positioner inserts female contacts 16A
size 77.27mixo-CGD 10 C
Crimp matrixes for CX7 contacts with 10mm² section
CRH 24
24 pole closure or reduction plate
  • In autoextinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
    • Protection degree: IP65
    CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • size 77.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    55 20 Z4T
    Socket head cap screw ISO4762 fitting for diecast hoods
  • Length is 20,7 mm
    • size 49.16-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CR 24 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • CWKA 10 J2M8
    Patch cord with 2 RJ45 connectors, male inserts
  • 8 data contacts, in metal enclosure
    • Protection degree: IP65
    CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • CGC 24 B
    Cover for bayonet locking
  • Aluminium
    • CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 49.16mixo-CCTPACM
    Positioner inserts male contacts 16A
    CHC 24 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • CK 03 CS
    Covers, with 2 pegs and gasket
  • For female inserts
    • CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 77.27-CCVPP
    Pneumatic foot valve
    size 104.27mixo-CGPZ LOC
    Locator for CG contacts
    size 49.16mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • CR 09 AD
    Plates for 1 D-sub insert, CZ/MZ/MZF enclosures
    Protection degree: IP65
    size 77.27-CRAD
    Straight cable clamping plate
    size 32.13-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CRQ 16
    Cable gland head and gasket for CQ 08 VA & CQS 08 VA enclosure
    size 77.27mixo-CYPZ LOC
    Locator for CY contacts
    CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27mixo-CITP D
    Turret head for CI contacts
    size 49.16-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.27-CGCP 24 MB
    Dust protection cover for hoods high protection IP68
    CR K03
    Plain coding pin for CK/CKS 03 inserts
    size 77.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    8709 P
    Fitting connection boards for 1:1 link (pin/socket)
    Number of contacts of range: 9-25
    CR 72
    Single coding and guide pin, for 72 codes
    size 104.27-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 21.21-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 77.27mixo-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CLES
    Removal tool for the extraction of contacts from the CX L inserts
    THCC 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • CKA 03 CS
    Covers, with 2 pegs
  • For female inserts
    • size 49.16mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    CRN 2
    Gaskets for ribbon cable hood
  • one slot for cable sizes 63.8 x 5.1 mm
    • size 104.27mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 49.16mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • Montrer 30 50 100 par page
    Précédente
    58 59 60 61 62
    Suivant