Accueil
Connecteurs
Alimentations électriques
Câblage
marques
Marchés
projets
Qui sommes nous
Actualités
contact
nl
en
fr
de
Produits
Vous êtes ici:
Accueil
Produits
Connecteurs
Rechercher
Produits
Connecteurs
PCB
Circulaire
Rectangulaire
Alimentations électriques
Marchés
Automation, Motion & Control
Lighting industry
Railway
E-bikes
Montrer
30
50
100
par page
Filtrer
Classement alphabétique
Plus récent en premier
Précédente
129
130
131
132
133
Suivant
Brass protective cap
For connectors with female thread
Pneumatic crimping tool for 10A and 16A contacts
Daniels WA27F (turret excluded)
Insulating black sealing plug M25
Protection cap for female cable connector
"go/no go" control gauge to verify indenter closure
for 10A,16A,40A contacts
Knurled hexagon nut 2mm
Plates for 1 D-sub insert, CZ/MZ/MZF enclosures
Protection degree:
IP65
Turret head for 5A D-SUB contacts
Replacement tip for CCES removal tool
Protection cap for male cable connector
Protection degree:
IP67
Bridge for delta connection
With 2 female 10 A contacts, silver plated and open type crimp barrel
Patch cord with 2 RJ 45 male connector s
with 4 data contacts, Class 5e
Polish paper grain size 4000
Blind reduction
green
Removal tools for the extraction of contacts from the insert
For 16 A contacts
Grommets and reductions
2 holes Ø 5,4 mm
Cable diameter range:
4,0 - 5,0 mm
Grommets and reductions
1 hole Ø 3,2 mm
Cable diameter range:
1,5 - 4,5 mm
Pneumatic foot valve
Grommets and reductions
3 holes Ø 3,3 mm
Cable diameter range:
2,0 - 4,0 mm
Crimping tool for 10A,16A,40A contacts
RENNSTEIG model (turret included)
Frame for bulkhead mounting housings
Aluminium
Seat for two shielded connectors
Female inserts, two seats for BUS connectors
Rated current:
10 A
Nominal rated voltage:
50 V
Crimp matrixes for CY contacts section 25 mm² and 35 mm²
Grommets and reductions
4 holes Ø 3,3 mm
Cable diameter range:
2,0 - 3,5 mm
Single code pins for 6 codings
SMDflat WKZ for SMDflat 345
blind reduction
Green
Grommets and reductions
slot 11,0 mm x 5,5 mm
Single code pins for 6 codings
Female double coding and guide pins, for 16 codes
Frames for bulkhead mounting housings
24 pole closure or reduction plate
In self-extinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
Protection degree:
IP65
insertion tool for insertion of the contacts into the inserts
And removal tool for the extraction of contacts from the insert for CI contacts
Grommets and reductions
2 holes Ø 3,3 mm
Cable diameter range:
2,0 - 4,0 mm
Jacket stripper for POF and MOST fibre optic with PA jacket
Grommets and reductions
1 hole Ø 3,2 mm
Cable diameter range:
1,5 - 4,5 mm
special tool to fix the cable
Crimping tool for 10A,16A,40A contacts
RENNSTEIG model (turret included)
Cable stripper, cuts the cable steath and releases the wires in a single operation
Pneumatic crimping tool for 10A and 16A contacts
Daniels WA27F (turret excluded)
Ground terminals for shielded cables and for several earth connections clams
In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures
Grommets and reductions
3 holes Ø 2,8 mm
Cable diameter range:
2,0 -3,0 mm
Removal tools for the extraction of contacts from the insert
For 10 A contacts
Grommet and reductions
slot 11,0 mm x 5,5 mm, Yellow
Locator for CY contacts
Wire termination tool
For part number 1300-T
Grommets and reductions
2 holes Ø 2,0 mm
Cable diameter range:
1,0 - 2,0 mm
panel mounting clip
Single code pins for 6 codings
Female coding and guide pin, for 72 codes
Montrer
30
50
100
par page
Filtrer
Classement alphabétique
Plus récent en premier
Précédente
129
130
131
132
133
Suivant
Les cookies assurent le bon fonctionnement de nos services. En utilisant ces derniers, vous acceptez l'utilisation des cookies.
J'accepte
> En savoir plus
