Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
136 137 138 139 140
Suivant
size 104.27mixo-CIES
insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 49.16-CRIC M3
    Panel fitted insert fastening screws
    size 77.62-CLC1
    Polish paper grain size 1000
    size 77.27-CRM
    Male double coding and guide pins, for 16 codes
    CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    6002002CC
    Lock nuts
    • round,7,5mm
    size 104.27-CLSP
    Fibre stripper for POF fibre optic
    size 104.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 49.16mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 77.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • CK 03 CX
    Covers, with lever and gasket
  • For female inserts
    • 6000339GT
    Grommets and reductions
    • 1 hole Ø 6,0 mm
    Cable diameter range: 5,5 - 7,0 mm
    size 44.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • CR 10 BPE
    PE jumpers
  • Galvanised brass
    • size 77.62mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 77.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    600024200*
    Grommets and reductions
    • hole Ø max 8,5 mm
    Cable diameter range: 7,0 - 9,0 mm
    7.010.900.144
    Multi-bus I, Female Thread, Pins 17 pole Multi-bus II, Male Thread, Sockets
    size 104.62mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 49.16mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    CHC 10
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 77.62-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 77.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • 600012700
    Grommets and reductions
    • slot 11,0 mm x 5,5 mm
    CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • M16cordsets-7.010.900.163
    Brass protective cap
    • For connectors M16 with female thread
    CRZ 24
    24 pole closure or reduction plate
  • In self-extinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
    • Protection degree: IP65
    size 49.16-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 44.27-CCPR RN
    Replacement tip for CCES removal tool
    size 77.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • 6000091MA
    blind grommet
    • white
    CYG 06H06
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "44.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    M23signal-7.010.900.127
    Assembly tool
    size 104.62-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CR 24 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • size 32.13-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • 6DB020500
    Grommets and reductions
    • hole Ø 9,0 mm
    Cable diameter range: 7,0 - 9,0 mm
    CRAS
    Angled cable clamping plate
    THCC 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • M23power-7.010.9S0.702
    Brass protective cap with chain
    • For connectors with male thread
    size 104.62mixo-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CGC 24
    Covers for screw locking
  • Aluminium
    • CR 08 EMC
    Conductive gasket for CQM male inserts
    6DB000800
    Double grommet
    • hole Ø 8 mm
    Cable diameter range: 7,0 - 8,5 mm
    size 44.27-CLDL
    Polishing disc for POF and MOST contacts
    CHC 32 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 66.40-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • M23-7.010.900.101
    Assembly tool
    size 77.62-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • Montrer 30 50 100 par page
    Précédente
    136 137 138 139 140
    Suivant