Connecteurs

Produits

Montrer 30 50 100 par page
Précédente
152 153 154 155 156
Suivant
600024500*
Grommets and reductions
  • hole Ø max 11,8 mm
Cable diameter range: 9,5 - 13,0 mm
size 77.27-CCVPP
Pneumatic foot valve
M23power-7.010.900.128
Adaptor flange for Straight Connectors
600030600*
Grommets and reductions
  • 2 holes Ø max 5,3 mm
Cable diameter range: 4,5 - 5,5 mm
CHC 16
Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 104.62-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 104.27mixo-CGPZ LOC
    Locator for CG contacts
    08-0045-000-001
    Rectangular flange for panel mount connectors
    6000040LF*,**
    blind reduction
    • Green
    CHCP 10 V
    Dust protection cover
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs with gasket
    • AL M25IN
    Insulating black cable glan M25
    size 77.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    6DB015700*
    additional cable retention
    600018200
    Grommets and reductions
    • 4 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 3,5 mm
    size 77.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    M23-7.010.900.128
    Adaptor flange for Straight Connectors
    WTC-1300-1
    Wire termination tool
  • For part number 1300-T
    • size 57.27-CCPR RN
    Replacement tip for CCES removal tool
    size 66.16-CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • size 104.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • 04-0106-001
    Rectangular flange for panel mount connectors
    600013600
    Grommets and reductions
    • 1 hole Ø 3,2 mm
    Cable diameter range: 1,5 - 4,5 mm
    size 57.27-CYG 06H10D
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "57.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 77.62-CR GND
    Metal adaptor
    6000219CC*
    Lock nuts
    • 14,0(h=21,0), CH 24,0 mm
    600012500
    Grommets and reductions
    • 2 holes Ø 3,3 mm
    Cable diameter range: 2,0 - 4,0 mm
    size 77.27-CRAD
    Straight cable clamping plate
    KK 33 B
    Cable bushings
  • 9 and 15 pole for series 17,47 and 57
    • Cable diameter range: 3,3-5,3 mm
    M23RJ45-7.000.900.101
    Plastic protective cap
    • For connectors with male/female thread
    08-3128-000-000
    Dummy Plug
    • PG9/M16 x 1,5
    size 57.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 49.16-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 104.62-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • 6000302CC
    panel mounting clip
    07-0010-001
    Mounting spanner for panel mount connectors
    6000114MA
    Grommets and reductions
    • 2 holes Ø 2,0 mm
    Cable diameter range: 1,0 - 2,0 mm
    CHCR 10 G
    Covers with 2 levers
  • For hoods
    • CX 1/2 BDM
    Adaptor male insert, 1 seat for BUS connector and 2 seats for 10A male contacts
    Type of connection: Crimp connection
    Rated current: 10 A
    Nominal rated voltage: 50 V
    size 77.62-CR 16 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • 6000087LF*
    cable reduction suggested for silicon-rubber and ∅ ≤7,0 mm cables
    604004900
    Grommets and reductions
    • hole Ø max 14,0 mm
    size 77.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    55 35 44T
    Thumb screw tinned with slot and internal thread in the head, fitting for plastic hoods
  • Length is 35 mm
    • size 104.62-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    08-2425-010-000
    Protection cap for female cable connector
    Protection degree: IP67
    6000225ME
    Grommets and reductions
    • hole Ø 6,5 mm
    Cable diameter range: 6,0- 7,0 mm
    size 57.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 49.16 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.62-CCTPACM
    Positioner inserts male contacts 16A
    Montrer 30 50 100 par page
    Précédente
    152 153 154 155 156
    Suivant