Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
25 26 27 28 29
Volgende
size 77.27-CR 16 FS
Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 104.62mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • CGKCP MB
    Dust protection cover for hoods high protection IP68
    size 77.62mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • CHCR 16 G
    Cover with 2 levers
  • For hoods
    • size 49.16mixo-CCVPP
    Pneumatic foot valve
    size 104.62mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    CKR 65 D
    Gasket and screw kit for IP66/IP67
  • For CD 07/08 inserts
    • CHC 16 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 49.16mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 104.62-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 77.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 77.62-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 49.16mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 104.62-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 77.27mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 77.62CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 66.40-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 57.27-CRM
    Male double coding and guide pins, for 16 codes
    CZCS 15 L
    Cover for electromagnetic compatibility with pegs
  • For 1 lever enclosures
    • size 104.62-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    CHC 50 S
    Covers with 4 pegs
  • For enclosures with 2 levers
    • CHC 10 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • CR 06 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 44.27 and Mixo frames for 2 inserts
    • size 104.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    CRN 3
    Gaskets for ribbon cable hood
  • one slot for cable sizes 36 x 9 mm
    • size 44.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CYG 06H10
    1 branch-off T-Box coupling to be fitted on DIN rails
  • For 2 hoods with lever and gasket "44.27" size and one housing "44.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    CXTP 40 F
    Turret heads for female contacts 40A
    CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    CHCW 06 L
    Cover with pegs
  • For 1 lever enclosures
    • size 104.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 77.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 44.27-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.62-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    CYPZ LOC
    Locator for CY contacts
    size 104.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 57.27-CW 1 J2M87
    Patch cord RJ45 with 2 RJ45 male connectors
  • with 8 data contacts
    • size 44.27mixo-CITP D
    Turret head for CI contacts
    size 104.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • size 44.27mixo-CCPR RN
    Replacement tip for CCES removal tool
    size 104.27mixo-CX CFM
    Lock-in tabs for modular units (6units) dividable
    CR 10 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 44.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    CCW PD 16
    Punching units for panel cut out of bulkhead mounting houdings
    size 104.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 57.27-CHC 10 C
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 44.27-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 104.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 44.27-CCW M25
    Punching nut for M25 hole
    CG 24 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • TCHC 10
    Covers with 4 pegs
  • Plastic,with eyelet
    • CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 104.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • AT U2F
    RJ45/USB/LC Connectors for ATR C22
  • USB 2.0 coupler F-F Type A
    • CHC 24 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 44.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 104.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 77.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 44.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    CG 06 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 104.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 77.27-CCPR RN
    Replacement tip for CCES removal tool
    CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • C7 06 FL-N
    Frames for bulkhead mounting housings
    size 104.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 104.62-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 77.27-CRAS
    Angled cable clamping plate
    size 44.27mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 104.62-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.27-CLSP
    Fibre stripper for POF fibre optic
    CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 104.27-CX 8 JM
    RJ45 male connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27mixo-CR 10 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 57.27mixo and mixo frames for 3 inserts
    • size 44.27mixo-CXTP 40 F
    Turret heads for female contacts 40A
    size 57.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 57.27-COB TCQ
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
    size 44.27-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.62-CCW M25
    Punching nut for M25 hole
    size 104.27-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CHCW 10 G
    Cover with 4 pegs
  • For enclosures with 2 levers
    • size 104.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27-CCW CT
    Hydraulic punching tool
    CR 24 BPE
    PE jumpers
  • Galvanized brass
    • CZCS 15 LG
    Cover for electromagnetic compatibility with lever
  • For enclosures with pegs
    • size 104.62-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    CHC 50 G
    Covers with 2 levers
  • For enclosures with 4 pegs
    • size 57.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    Toon 30 50 100 per pagina
    Vorige
    25 26 27 28 29
    Volgende