Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
26 27 28 29 30
Volgende
size 57.27-CCPNP
"go /no go" control gauge to verify indenter closure
size 104.27-CCPZPA
Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.62-CRAS
    Angled cable clamping plate
    CRAD
    Straight cable clamping plate
    CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 77.27mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 104.62-CRIC M3
    Panel fitted insert fastening screws
    THCH 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 57.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 104.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.62-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 44.27-CLC4
    Polish paper grain size 4000
    size 104.27-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.27mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 104.62mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 57.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 104.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.62mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    CR 24 BPE
    PE jumpers
  • Galvanized brass
    • size 77.27mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 104.62mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 57.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    size 57.27mixo-CR 10 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 57.27 and Mixo frames for 3 inserts
    • size 104.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 77.62mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 44.27mixo-CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • CRN 3
    Gaskets for ribbon cable hood
  • one slot for cable sizes 36 x 9 mm
    • size 77.27-CX 8 JF
    RJ45 female connector with 8 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.62mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 57.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 57.27-CGCP 10 FX
    Dust protection cover for housings high protection IP68
    size 104.27mixo-CYD 70 C
    Crimp matrixes for CY contacts section 70mm²
    size 77.62mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 44.27mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • CXTP 40 F
    Turret heads for female contacts 40A
    size 77.27mixo-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • size 57.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 57.27-CYG 06H0606
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 1 "44.27" size fixing side housing and one "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 104.27mixo-5A-CIPZ D
    Crimping tool for 5A contacts
  • Daniels AFM8 model (turret excluded)
    • size 77.62-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 77.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.27-CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.62-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • CGC 10
    Cover for screw locking
  • Aluminium
    • size 104.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.62-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 44.27-CW 2 UAM
    Patch cable USB-A/USB-A, 2 meter
    size 77.27-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    CG 16 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • C7 10 FL-N
    Frames for bulkhead mounting housings
    size 104.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • CHCW 32
    Cover with 4 pegs
  • For enclosures with 2 levers
    • CR 09 AD1
    Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    C7 16 FL-N
    Frames for bulkhead mounting housings
    size 77.62-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 44.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 104.27-CX 02 BF
    Seat for two shielded connectors
  • Female inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    CYG 06H1010
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 57.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 77.62-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 44.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 104.27mixo-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 77.27mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 104.62 72-CRM
    Male coding and guide pin, for 72 codes
    CZCR 06 LG
    Cover with lever
  • For hoods
    • size 57.27 72-CRF
    Female coding and guide pin, for 72 codes
    CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 77.62-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 44.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 104.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 77.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 104.62-CLSP
    Fibre stripper for POF fibre optic
    size 57.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 104.27 72-CRF
    Female coding and guide pin, for 72 codes
    size 77.62mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 44.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • CG 24 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 77.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 57.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 104.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 77.62mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 44.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    CHC 24 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 104.62mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 57.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 57.27mixo-CR 10 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 77.62mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 44.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • size 77.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.27-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • size 104.62mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 57.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • size 57.27-CR 10 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 57.27 and mixo frames for 3 inserts
    • size 104.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 77.27-CCPR RN
    Replacement tip for CCES removal tool
    size 77.27-CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • size 104.62mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    Toon 30 50 100 per pagina
    Vorige
    26 27 28 29 30
    Volgende