Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
34 35 36 37 38
Volgende
size 77.62mixo-CXTP 40 F
Turret heads for female contacts 40A
size 104.27mixo-CIVES
Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • size 77.27-CR 72
    Single coding and guide pin, for 72 codes
    size 104.62mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CHCN 10 G
    Covers with 2 levers
  • Aluminium
    • size 104.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 44.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR VPTG
    Screws for second earth terminal
  • For CP, CX 12/2, CX 6/36, CX 4/0, CX 4/2 inserts
    • size 104.62mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    CR 10 BPE
    PE jumpers
  • Galvanised brass
    • size 77.62-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27mixo-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 77.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 104.62-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CHC 10
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 77.62mixo-CR 16 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.27-CR GND
    Metal adaptor
    CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 104.62-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 44.27-CCPR RN
    Replacement tip for CCES removal tool
    size 104.27mixo-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CYG 06H06
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "44.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.62-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    CRAS
    Angled cable clamping plate
    size 104.27-CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • THCC 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 77.62-CR 20
    Single code pins for 6 codings
    size 104.27-CR CP
    Plain coding pin for CD and CDD inserts
    size 44.27-CLDL
    Polishing disc for POF and MOST contacts
    CHCN 24 G
    Covers with 2 levers
  • Aluminium
    • size 104.62-CT APE
    Support for rail mounting DIN EN 60715
  • For CT,CTS,CTSE
    • size 77.62-CLSG
    Jacket stripper for POF and MOST fibre optic with PA jacket
    size 104.27-CRIC M3
    Panel fitted insert fastening screws
    CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • size 104.62mixo-ZFU-CD
    Stripping, crimping machine Zoller+Fröhlich AM-03 universal model
    size 57.27-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 77.62mixo-CYPZ LOC
    Locator for CY contacts
    size 104.27mixo-CCTPADM
    Positioner inserts male contacts 10A
    size 44.27mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 77.27-CCTPACM
    Positioner inserts male contacts 16A
    size 104.62mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 57.27-CGCP 10 MB
    Dust protection cover for hoods high protection IP68
    size 77.62mixo-CITP D
    Turret head for CI contacts
    size 104.27mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 44.27mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 104.62mixo-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 57.27-CYG 06H0610
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 1 "57.27" size fixing side housing and one "44.27" size enclosure
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.62mixo-CCPR RN
    Replacement tip for CCES removal tool
    size 104.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 44.27-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 77.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 104.62mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    CGC 10 B
    Covers for bayonet locking
  • Aluminium
    • size 77.62mixo-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 44.27-CHES
    Contact holder removal tool
    size 77.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 104.62-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    CR 10 MO
    Flange gasket
    size 77.62-CX 02 BM
    Seat for two shielded connectors
  • Male inserts, two seats for BUS connectors
    • Rated current: 10 A
    Nominal rated voltage: 50 V
    size 104.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR 09 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    size 104.62-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 44.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CHCW 32 G
    Cover with 2 levers
  • For enclosures with 4 pegs
    • CR 06 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.62-CCTPACF
    Positioner inserts female contacts 16A
    size 104.27-CCTPACM
    Positioner inserts male contacts 16A
    size 44.27-CR 72
    Single coding and guide pin, for 72 codes
    CPT 24
    Temporary protection cover for transportation
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • CGC 06
    Cover for Screw locking
  • Aluminium
    • size 77.62-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • size 104.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 104.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CHC 06 SL
    Covers with pegs
  • For enclosures with lever
    • size 104.62 72-CRF
    Female coding and guide pin, for 72 codes
    size 77.62-CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • size 104.27-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 44.27mixo-CCTPACF
    Positioner inserts female contacts 16A
    CHCW 24 G
    Cover with 2 levers
  • For enclosures with 4 pegs
    • size 104.62-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    size 77.62mixo-CCTPADF
    Positioner inserts female contacts 10A
    size 104.27-CLSP
    Fibre stripper for POF fibre optic
    size 44.27mixo-CGPZ LOC
    Locator for CG contacts
    CHC 24
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • size 104.62mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 57.27mixo-CR 10 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 77.62mixo-CGD 10 C
    Crimp matrixes for CX7 contacts with 10mm² section
    size 44.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 77.27-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • size 104.62mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    CHC 16
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • CCTPACF
    Positioner inserts female contacts 16A
    size 77.27mixo-CCVPP
    Pneumatic foot valve
    CZC 25 LG
    Covers, with lever
  • For enclosures with pegs
    • size 57.27-CCPR RN
    Replacement tip for CCES removal tool
    CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • size 77.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    Toon 30 50 100 per pagina
    Vorige
    34 35 36 37 38
    Volgende