Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
35 36 37 38 39
Volgende
CHCW 50 G
Covers with 2 levers
  • For enclosures with 4 pegs
    • size 104.27-CJST
    Cable stripper, cuts the cable steath and releases the wires in a single operation
    size 77.62mixo-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 32.13-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CHC 24 SL
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 66.16-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 104.27mixo-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 77.62-CX 4 JM
    RJ45 male connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1.4 A
    Nominal rated voltage: 50 V
    size 104.62-CCW M25
    Punching nut for M25 hole
    CRQ 16
    Cable gland head and gasket for CQ 08 VA & CQS 08 VA enclosure
    size 77.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 104.62-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 66.16-CRIC M3
    Panel fitted insert fastening screws
    size 104.27mixo-CGD 35 C
    Crimp matrixes for CG contacts with 35 mm² section
    size 77.62-CX 8 J6IM
    RJ45 male crimp connector
  • 8 data contacts
    • size 57.27-CCW CT
    Hydraulic punching tool
    CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 77.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 104.62CR..SC-CR 05...
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 49.16-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.27mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • CHC 32 S
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • CR K03
    Plain coding pin for CK/CKS 03 inserts
    size 77.27-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 77.62-CCPNP RN
    Crimping tool for 10A,16A,40A contacts
  • RENNSTEIG model (turret included)
    • CR 72
    Single coding and guide pin, for 72 codes
    size 21.21-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • size 77.27-CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 77.62-CRF
    Female double coding and guide pins, for 16 codes
    CLES
    Removal tool for the extraction of contacts from the CX L inserts
    size 104.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CKA 03 CS
    Covers, with 2 pegs
  • For female inserts
    • size 104.62-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 77.62-CLTE
    Cable cutter for Ø 2,3 mm max., for POF and MOST fibre optic
    size 49.16mixoCX7-CGD 25...
    Crimp matrixes for CX7 contacts with 25 mm² section
    size 104.27mixo-CR 24 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • size 104.62-CLC1
    Polish paper grain size 1000
    size 104.27-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 77.62mixo-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 49.16mixo-CXES
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø < 5 mm
    • size 104.27-CGCP 24 FX
    Dust protection cover for housings high protection IP68
    size 104.62-CCTPACF
    Positioner inserts female contacts 16A
    CHC 06 LG
    Covers with lever
  • For hoods with pegs
    • size 104.27-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • size 77.62mixo-CIVTP D
    Turret head for 5A D-SUB contacts
    size 104.27-COB TSFS
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support or cable clamp bands
    • size 104.62mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 66.40-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.27-CRAD
    Straight cable clamping plate
    size 77.62mixo-CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CZC 15 L
    Covers with 2 pegs
  • For 1 lever enclosures
    • THCH 24 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 104.62-CR TT
    Heat shrink tube for CYFA/CYMA 16 contacts or for conductor with total external ø < 10 mm
    size 66.16-CCTPACM
    Positioner inserts male contacts 16A
    size 104.27-CLC4
    Polish paper grain size 4000
    size 77.62mixo-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    CCW PD 16
    Punching units for panel cut out of bulkhead mounting houdings
    size 32.13-CCPR RN
    Replacement tip for CCES removal tool
    CRN 1
    Gaskets for ribbon cable hood
  • one slot for cable sizes 18.8 x 5.8 mm
    • size 66.16-CR CPQ
    Plain coding pin for CDC, CQ,CQE,CCE,CMCE and MIXO 16A inserts
    size 104.27mixo-CYD 35 C
    Crimp matrixes for CY contacts section 25 mm² and 35 mm²
    size 77.62-CX 8/2 JF
    RJ 45 female connector with 8 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 44.27-CCW M25
    Punching nut for M25 hole
    CCTPACF
    Positioner inserts female contacts 16A
    CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 44.27 72-CRM
    Male coding and guide pin, for 72 codes
    size 77.27mixo-CR 16 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 77.27 and mixo frames for 4 inserts
    • CHCR 06 L
    Cover with pegs
  • For housings
    • size 57.27mixo-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 77.27-CR 26 V
    Short screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 57.27-CW 0,5 J2M4E
    Patch cord with 2 RJ 45 male connector s
  • with 4 data contacts, Class 5e
    • size 44.27mixo-CCVPP
    Pneumatic foot valve
    CG 16 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • size 44.27mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    C7 16 FL-N
    Frames for bulkhead mounting housings
    size 57.27-CX CFM
    Lock-in tabs for modular units (6units) dividable
    size 44.27mixo-CCTP 16
    turret heads for 16 A contacts (CCF & CCM series)
    size 57.27-CCPZP
    Pneumatic crimping tool for 10A and 16A contacts
  • Daniels WA27F (turret excluded)
    • size 57.27CR..SC-CR 05 CA
    U-bolt for cable screening
  • To be fitted on CR..SC anchors
    • size 77.27mixoCY-CGD 25 C
    Crimp matrixes for CY contacts section 16mm²
    size 57.27 72-CRF
    Female coding and guide pin, for 72 codes
    CHIN 10
    Bulkhead mounting housings with double lever
  • Aluminium
    • Locking Mecahnism: Double locking levers
    Position cable feed: Below
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27mixo-CCPZ RN
    "go/no go" control gauge to verify indenter closure
  • for 10A,16A,40A contacts
    • size 44.27-CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 57.27-CJPZ Y
    RJ45 CJ series plug insert crimp pliers
  • basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter
    • THCH 10 G
    Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • size 77.27-CX BES
    Extraction tool for Mixo Bus connector
  • For the extraction of he BUS shielded connectors from the MIXO BUS insert
    • size 44.27mixo-CR 06 FS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • In zinc iron, to be mounted on inserts size 44.27 and mixo frames for 2 inserts
    • size 57.27mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 44.27-CCTPADM
    Positioner inserts male contacts 10A
    CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • size 57.27mixo-CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 44.27-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.27-CX 8 J6M
    RJ45 male IDC connector
  • 8 data contacts
    • COB TSF
    Kit with 2 elements, for coupling of inserts with screw fixing centre distance
  • With handle for cable support bands
    • size 57.27mixo-CXPZ D
    Crimping tool for 40A contacts
  • Daniels M309 model
    • CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 77.27-CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • THCW 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • size 44.27-CLC1
    Polish paper grain size 1000
    Toon 30 50 100 per pagina
    Vorige
    35 36 37 38 39
    Volgende