Producten

Vorige

28 29 30 31 32

Volgende

CRZ 10

24 pole closure or reduction plate

In self-extinguishing thermoplastic resin with gasket in vinil-nitrile elastomer

Protection degree: IP65

size 77.62mixo-CGD 16 C

Crimp matrixes for CG contacts with 16 mm² section

size 57.27-CCPZP

Pneumatic crimping tool for 10A and 16A contacts

Daniels WA27F (turret excluded)

size 57.27-CR 10 SC

Ground terminals for shielded cables and for several earth connections clams

In zinc plated iron, to be fitted on connectors in bulkhead housings, high hoods and COB series enclosures

size 77.62mixo-CCTP 10

Turret heads for 10 A contacts (CDF & CDM series)

size 104.62mixo-CCES

Removal tools for the extraction of contacts from the insert

For 10 A contacts

size 57.27 72-CRF

Female coding and guide pin, for 72 codes

size 57.27-CHC 10 LG

Covers with 1 lever

For hoods with 2 pegs

size 77.62mixo-CDMA 6A

6A male contacts for male inserts with terminal Ø 1mm

Type of connection: Crimp connection

Rated current: 6 A

size 57.27-CJPZ Y

RJ45 CJ series plug insert crimp pliers

basic tool Yamaichi Y-contTool-11 mod. With plug insert inserter

THCW 10 G

Covers with 2 thermoplastic levers and gasket

Plastic, with loop

size 77.62-CX 8 JF

RJ45 female connector with 8 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

size 104.62-CCTPACF

Positioner inserts female contacts 16A

size 104.62-CW 2 UAM

Patch cable USB-A/USB-A, 2 meter

size 57.27mixo-CCTPACM

Positioner inserts male contacts 16A

size 77.62-CR 05 CA

Clamps for shielding cables

To be mounted on CR..ST ground terminals

size 104.62-CR BDE

Bridge for delta connection

With 2 female 10 A contacts, silver plated and open type crimp barrel

5850GDC

Cable clamps for series 07,103,104,07DC,17DC,104DC,117DC

Cable diameter range: 8-16 mm

size 77.62-CCTPADM

Positioner inserts male contacts 10A

size 57.27mixo-CPPZ C

Crimping tool for 70A/100A/200A series contacts

Basic tool mod. CEMBRE HT 45

size 104.27-CCTPACF

Positioner inserts female contacts 16A

size 77.27-CX 8 J6M

RJ45 male IDC connector

8 data contacts

size 57.27mixo-CXPZ D

Crimping tool for 40A contacts

Daniels M309 model

size 77.62-CCINA

Insertion tool for insertion of the contacts into the inserts

For crimped contacts up to 0.75 mm²

size 104.27-CCPR RN

Replacement tip for CCES removal tool

size 77.27-CR TM-1

Metal replacement handles

To replace thermoplastic handles 2 component kit for dual lever enclosures

size 104.62mixo-CCTPACF

Positioner inserts female contacts 16A

size 77.62-CT APE

Support for rail mounting DIN EN 60715

For CT,CTS,CTSE

size 77.62-CCW M25

Punching nut for M25 hole

size 104.27-CIF 2.4 A

Interface for printed circuit with 6 female contacts (silver)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

CR 16 ST

Ground terminals for shielded cables

In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods

size 104.62mixo-CGPZ LOC

Locator for CG contacts

size 57.27-CX 8 JM

RJ45 male connector with 8 data contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

size 77.62-CLPZ R

Crimping tool for POF CX PL and MOST CX ML contacts

RENNSTEIG model

size 44.27-CCW CT

Hydraulic punching tool

size 104.27-CLSG

Jacket stripper for POF and MOST fibre optic with PA jacket

CHCW 16

Cover with 4 pegs

For enclosures with 2 levers

size 77.62mixoCY-CGD 25 C

Crimp matrixes for CY contacts section 16mm²

size 57.27-ZFU-CD

Stripping, crimping machine Zoller+Fröhlich AM-03 universal model

CHCP 10

Dust protection cover

For housings and hoods with 1 or 2 levers, with 2 or 4 pegs

size 77.62mixo-CCPZ RN

"go/no go" control gauge to verify indenter closure

for 10A,16A,40A contacts

size 104.62mixo-CXES

Removal tools for the extraction of contacts from the insert

For 40A contacts and cables Ø < 5 mm

size 57.27-CCPNP

"go /no go" control gauge to verify indenter closure

size 57.27-CYG 06H06D

1 branch-off T-Box coupling

For 2 hoods with lever and gasket "44.27" size and one housing "57.27" size

Locking Mecahnism: Single locking lever

Material housing: Aluminium

Protection degree: IP65

size 77.62-CX BES

Extraction tool for Mixo Bus connector

For the extraction of he BUS shielded connectors from the MIXO BUS insert

size 57.27-CIF 2.4

Interface for printed circuit with 6 female contacts (gold)

For up to 2,4 mm thick PCB

Type of connection: Soldering connection

Rated current: 6 A

CHCR 10

Cover with 4 pegs

For housings

size 104.62-CX 4 JF

RJ45 female connector with 4 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

size 57.27-CLES

Removal tool for the extraction of contacts from the CX L inserts

size 77.62-CX 8 J6M

RJ45 male IDC connector

8 data contacts

size 44.27-CW 2 UAM

Patch cable USB-A/USB-A, 2 meter

size 77.27mixo-CXPNP

"go /no go" control gauge to verify indenter closure

For 40A contacts

size 49.16mixoCX7-CGD 25...

Crimp matrixes for CX7 contacts with 25 mm² section

C7 10 FL-N

Frames for bulkhead mounting housings

size 104.27CR..SC-CR 05...

U-bolt for cable screening

To be fitted on CR..SC anchors

CR 09 AD1

Plates for 1 D-sub insert, CH/CA and MH/MA/MF enclosures

Protection degree: IP65

size 49.16mixo-CXES

Removal tools for the extraction of contacts from the insert

For 40A contacts and cables Ø < 5 mm

size 44.27-CCPZP

Pneumatic crimping tool for 10A and 16A contacts

Daniels WA27F (turret excluded)

CHCR 24 G

Cover with 2 levers

For hoods

CYG 06H1010

2 branch-off T-Box coupling

For 2 "44.27" size hoods with lever and gasket and 2 "57.27" size housing

Locking Mecahnism: Single locking lever

Material housing: Aluminium

Protection degree: IP65

size 44.27 72-CRF

Female coding and guide pin, for 72 codes

CHC 24 C

Covers with 4 pegs and gasket

For enclosures with 2 levers

CZCR 06 LG

Cover with lever

For hoods

CZC 15 L

Covers with 2 pegs

For 1 lever enclosures

size 44.27-CJST

Cable stripper, cuts the cable steath and releases the wires in a single operation

size 77.27-CCPZP

Pneumatic crimping tool for 10A and 16A contacts

Daniels WA27F (turret excluded)

CHC 06 L

Covers with pegs

For enclosures with lever

size 104.27mixo-CGD 25 C

Crimp matrixes for CG contacts with 25 mm² section

size 32.13-CCPR RN

Replacement tip for CCES removal tool

size 44.27mixo-CCPZPA

Crimping tool with automatic positioner

Daniels WA27FAP (inserts excluded)

size 77.27-CCES

Removal tools for the extraction of contacts from the insert

For 10 A contacts

size 66.40-CR VATG

Screws for second earth terminal

For CDA/CDC inserts

size 104.27mixo-CCTP 16

turret heads for 16 A contacts (CCF & CCM series)

CCTPACF

Positioner inserts female contacts 16A

size 44.27mixo-CGD 35 C

Crimp matrixes for CG contacts with 35 mm² section

size 77.27-CRBF

Coupling screws

Bush for CT,CTS,CTSE inserts

size 66.16-CCTPADF

Positioner inserts female contacts 10A

CR BDE

Bridge for delta connection

With 2 female 10 A contacts, silver plated and open type crimp barrel

size 44.27mixo-CXES

Removal tools for the extraction of contacts from the insert

For 40A contacts and cables Ø < 5 mm

size 77.27-CLDL

Polishing disc for POF and MOST contacts

size 66.16-CCES

Removal tools for the extraction of contacts from the insert

For 10 A contacts

size 49.16-CCTP 10

Turret heads for 10 A contacts (CDF & CDM series)

size 104.27-CX 4/2 JF

RJ 45 female connector with 4 data contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

CWKA 10 J2M8

Patch cord with 2 RJ45 connectors, male inserts

8 data contacts, in metal enclosure

Protection degree: IP65

size 77.27mixo-CYD 50 C

Crimp matrixes for CY contacts section 50mm²

CZCW 25 LG

Cover with lever

For enclosures with pegs

CR VATG

Screws for second earth terminal

For CDA/CDC inserts

size 104.27mixo-CR 24 FS

Grip panels for cables outside enclosures equipped with fixing screws and rings

In zinc iron, to be mounted on inserts size 104.27 and mixo frames for 6 inserts

CX 4/2 JF

RJ 45 female connector with 4 data contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

size 44.27-CX 4 JF

RJ45 female connector with 4 data contacts & 2 power contacts

Type of connection: Crimp connection

Rated current: 1 A

Nominal rated voltage: 50 V

size 77.27mixo-CIPZ D

Crimping tool for CI contacts

Daniels AFM8 model (turret excluded)

size 49.16mixo-CCTPACM

Positioner inserts male contacts 16A

CHCP 24

Dust protection cover

For housings and hoods with 1 or 2 levers, with 2 or 4 pegs

CK 03 CS

Covers, with 2 pegs and gasket

For female inserts

size 77.27mixo-CCINA

Insertion tool for insertion of the contacts into the inserts

For crimped contacts up to 0.75 mm²

CIES

insertion tool for insertion of the contacts into the inserts

And removal tool for the extraction of contacts from the insert for CI contacts

size 44.27-ZFU-CD

Stripping, crimping machine Zoller+Fröhlich AM-03 universal model

size 104.27-COB TSF

Kit with 2 elements, for coupling of inserts with screw fixing centre distance

With handle for cable support bands

CR 26 V

Short screws for grip panels of cables outside enlcosures

In zinc iron, N° 2 pieces

size 77.27-CW 0,5 J2M8

Patch cord with 2 RJ 45 male connector s

with 8 data contacts

Vorige

28 29 30 31 32

Volgende