Connectoren

Producten

Toon 30 50 100 per pagina
Vorige
33 34 35 36 37
Volgende
CCW PD 24
Punching units for panel cut out of bulkhead mounting houdings
size 104.27-CQES
Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • size 104.62mixo-CCVPP
    Pneumatic foot valve
    size 77.62-CRAD
    Straight cable clamping plate
    size 49.16-CCW M25
    Punching nut for M25 hole
    5850GDC
    Cable clamps for series 07,103,104,07DC,17DC,104DC,117DC
    Cable diameter range: 8-16 mm
    size 104.27-CR 20
    Single code pins for 6 codings
    size 104.62mixo-CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 77.62-CLDL
    Polishing disc for POF and MOST contacts
    AT U3F
    RJ45/USB/LC Connectors for ATR C22
  • USB 3.0 coupler F-F Type A
    • size 104.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 77.62mixo-CYD 50 C
    Crimp matrixes for CY contacts section 50mm²
    size 77.62mixo-CIPZ D
    Crimping tool for CI contacts
  • Daniels AFM8 model (turret excluded)
    • size 77.62mixo-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 77.62-CW 0,5 J2M8
    Patch cord with 2 RJ 45 male connector s
  • with 8 data contacts
    • size 104.62-CX 6/2 JM
    RJ45 male connector with 6 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.62-CHES
    Contact holder removal tool
    size 104.62-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • size 104.62mixo-CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CHC 32 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 104.62-CRBM
    Coupling screws
  • Screw pin for CD, CNE,CCE, CSE,CSH inserts
    • size 77.62-CCVPP
    Pneumatic foot valve
    CPPZ C
    Crimping tool for 70A/100A/200A series contacts
  • Basic tool mod. CEMBRE HT 45
    • size 104.62-CLC1
    Polish paper grain size 1000
    size 77.62-CR CP
    Plain coding pin for CD and CDD inserts
    CCW M25
    Punching nut for M25 hole
    size 104.27-CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • size 66.16-CCW CT
    Hydraulic punching tool
    55 47 44T
    Thumb screw tinned with slot and internal thread in the head, fitting for plastic hoods
  • Length is 47 mm
    • size 104.27-CRBF
    Coupling screws
  • Bush for CT,CTS,CTSE inserts
    • size 104.62mixo-CXES-10
    Removal tools for the extraction of contacts from the insert
  • For 40A contacts and cables Ø <7.5 mm
    • size 77.62mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 104.27-CLPZ R
    Crimping tool for POF CX PL and MOST CX ML contacts
  • RENNSTEIG model
    • size 77.62mixo-CGPZ LOC
    Locator for CG contacts
    size 77.62mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 104.62mixo-CCPR RN
    Replacement tip for CCES removal tool
    CCTPACF
    Positioner inserts female contacts 16A
    size 44.27-CR 72
    Single coding and guide pin, for 72 codes
    CHCN 24 G
    Covers with 2 levers
  • Aluminium
    • CR 37 AD2
    plates for 2 D-sub inserts, CH/CA and MH/MA/MF enclosures
    Protection degree: IP65
    CGC 06
    Cover for Screw locking
  • Aluminium
    • CR BDE
    Bridge for delta connection
  • With 2 female 10 A contacts, silver plated and open type crimp barrel
    • TCHC 24
    Covers with 4 pegs
  • Plastic, with eyelet
    • size 77.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • size 49.16-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CHC 06 SL
    Covers with pegs
  • For enclosures with lever
    • size 57.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CWKA 10 J2M8
    Patch cord with 2 RJ45 connectors, male inserts
  • 8 data contacts, in metal enclosure
    • Protection degree: IP65
    size 44.27mixo-CCTPACF
    Positioner inserts female contacts 16A
    size 77.27-CCTPACM
    Positioner inserts male contacts 16A
    CHCS 16
    Cover for electromagnetic compatibility with 4 pegs
  • For enclosures with 2 levers
    • CR VATG
    Screws for second earth terminal
  • For CDA/CDC inserts
    • size 66.40-CR VDTG
    Screws for second earth terminal
  • For C15/25 & CDD 38 inserts
    • size 57.27mixo-CR 10 DF
    Self-centering floating frame in stainless steel
  • To be mounted on inserts size 57.27 and Mixo frames for 3 inserts
    • CX 4/2 JF
    RJ 45 female connector with 4 data contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 104.27mixoCX7-CGD...
    Crimp matrixes for CX7 contacts with 16 mm² section
    size 44.27mixo-CGPZ LOC
    Locator for CG contacts
    size 77.27-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    CHC 16 L
    Covers with 2 pegs
  • For enclosures with 1 lever with gasket
    • size 49.16mixo-CCTPACM
    Positioner inserts male contacts 16A
    size 66.16-CCTPADM
    Positioner inserts male contacts 10A
    size 57.27-CGCP 10 FX
    Dust protection cover for housings high protection IP68
    CK 03 CS
    Covers, with 2 pegs and gasket
  • For female inserts
    • size 104.27mixo-CXTP 40 M
    Turret heads for male contacts 40A
    size 44.27mixo-CXPNP
    "go /no go" control gauge to verify indenter closure
  • For 40A contacts
    • size 77.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 57.27-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CIES
    insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for CI contacts
    • size 66.16-CCINA
    Insertion tool for insertion of the contacts into the inserts
  • For crimped contacts up to 0.75 mm²
    • size 57.27-CYG 06H0606
    2 branch-off T-Box coupling
  • For 2 "44.27" size hoods with lever and gasket and 1 "44.27" size fixing side housing and one "57.27" size housing
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27-COPZ
    Crinmping tool for CX 50 F/M and CX 75 F/M Coaxial contacts
    size 57.27-CDFA 6A
    6A female contacts for female inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 49.16mixo-CCES
    Removal tools for the extraction of contacts from the insert
  • For 10 A contacts
    • CZCS 25 L
    Cover for electromagnetic compatibility with pegs
  • For 1 lever enclosures
    • CGC 10
    Cover for screw locking
  • Aluminium
    • size 104.27-CX 4/2 JM
    RJ45 male connector with 4 data contacts & 2 power contacts
    • Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 44.27-CX 4E JM
    RJ45 male connector, 4 data contacts cat. 5e profiNET
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    size 77.27mixo-CCSPZP
    Support for CCPZP pneumatic crimping tool
    size 57.27-CLSP
    Fibre stripper for POF fibre optic
    CR 09 AD
    Plates for 1 D-sub insert, CZ/MZ/MZF enclosures
    Protection degree: IP65
    size 77.27mixo-CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 32.13-CCSPZP
    Support for CCPZP pneumatic crimping tool
    CHC 10
    Covers with 4 pegs
  • For enclosures with 2 levers with gasket
    • CPT 24
    Temporary protection cover for transportation
  • For housings and hoods with 1 or 2 levers, with 2 or 4 pegs
    • size 77.27-CX 4 JF
    RJ45 female connector with 4 data contacts & 2 power contacts
    Type of connection: Crimp connection
    Rated current: 1 A
    Nominal rated voltage: 50 V
    CR 42 V
    Long screws for grip panels of cables outside enlcosures
  • In zinc iron, N° 2 pieces
    • size 77.27mixo-CCTP 10
    Turret heads for 10 A contacts (CDF & CDM series)
    size 57.27mixo-CIVES
    Insertion tool for insertion of the contacts into the inserts
  • And removal tool for the extraction of contacts from the insert for 5A D-SUB contacts
    • CRQ 16
    Cable gland head and gasket for CQ 08 VA & CQS 08 VA enclosure
    size 44.27-CCPR RN
    Replacement tip for CCES removal tool
    size 104.27-CR 05 CA
    Clamps for shielding cables
  • To be mounted on CR..ST ground terminals
    • CYG 06H06
    1 branch-off T-Box coupling
  • For 2 hoods with lever and gasket "44.27" size and one housing "44.27" size
    • Locking Mecahnism: Single locking lever
    Material housing: Aluminium
    Protection degree: IP65
    size 77.27mixo-CDMA 6A
    6A male contacts for male inserts with terminal Ø 1mm
    Type of connection: Crimp connection
    Rated current: 6 A
    size 57.27mixo-CCPZ MIL
    Crimping tool for 10 A and 16 A contacts
  • Daniels AF8 model
    • CQES
    Removal tools for the extraction of contacts from the insert
  • For 16 A contacts
    • CRAS
    Angled cable clamping plate
    CHCW 24 G
    Cover with 2 levers
  • For enclosures with 4 pegs
    • CR..SSsize 77.27-CR 05 CA
    Clamp for grip panels of cables outside enclosure
  • To be mounted on CR..SS anchorage
    • size 49.16-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • THCC 06 LG
    Covers with thermoplastic lever and gasket
  • Plastic, with loop
    • Toon 30 50 100 per pagina
    Vorige
    33 34 35 36 37
    Volgende