Connectoren

Producten

Toon 30 50 100 per pagina
1 2 3 4
Volgende
THCC 24 G
Covers with 2 thermoplastic levers and gasket
  • Plastic, with loop
    • CRN 2
    Gaskets for ribbon cable hood
  • one slot for cable sizes 63.8 x 5.1 mm
    • CCW PD 24
    Punching units for panel cut out of bulkhead mounting houdings
    CGD 16 C
    Crimp matrixes for CG contacts with 16 mm² section
    size 104.27 72-CRF
    Female coding and guide pin, for 72 codes
    CRH 24
    24 pole closure or reduction plate
  • In autoextinguishing thermoplastic resin with gasket in vinil-nitrile elastomer
    • Protection degree: IP65
    CR 24 SS
    Grip panels for cables outside enclosures equipped with fixing screws and rings
  • For shielded cables, to be mounted on inserts size 104.27 and mixo frames for 6 inserts
    • CGC 24 B
    Cover for bayonet locking
  • Aluminium
    • CHC 24 G
    Covers with 2 levers
  • For hoods with 4 pegs
    • size 104.27-CCPZPA
    Crimping tool with automatic positioner
  • Daniels WA27FAP (inserts excluded)
    • size 104.27-CCPNP
    "go /no go" control gauge to verify indenter closure
    size 104.27-CIF 2.4
    Interface for printed circuit with 6 female contacts (gold)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    size 104.27-CGCP 24 MB
    Dust protection cover for hoods high protection IP68
    size 104.27-CR 24 ST
    Ground terminals for shielded cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • size 104.27-CR 24 AT
    Anchorages for several earth connections cables
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CR 24 BPE
    PE jumpers
  • Galvanized brass
    • CRN 3
    Gaskets for ribbon cable hood
  • one slot for cable sizes 36 x 9 mm
    • CGD 25 C
    Crimp matrixes for CG contacts with 25 mm² section
    size 104.27-CR 72
    Single coding and guide pin, for 72 codes
    size 104.27-CR VNTG
    Screws for second earth terminal
  • For CD40/64, CDD 24/42/72/108, CQE, CNE,CSS, CX 8/24, CCE, CSE, CMSE, CME, CMCE, CSH inserts
    • size 104.27-CR SP
    Supports for grip panels of cables outside enclosures
  • In die-cast zinc N° 2 pieces
    • CG 24 FL
    Frame for bulkhead mounting housings
  • Aluminium
    • CHC 24 LG
    Covers with 1 lever
  • For hoods with 2 pegs
    • size 104.27-CCTPACF
    Positioner inserts female contacts 16A
    size 104.27-CCPR RN
    Replacement tip for CCES removal tool
    size 104.27-CIF 2.4 A
    Interface for printed circuit with 6 female contacts (silver)
  • For up to 2,4 mm thick PCB
    • Type of connection: Soldering connection
    Rated current: 6 A
    CBGF
    Insert joining block
  • Made of die cast aluminium alloy to mate 2 inserts
    • size 104.27-CR TM-1
    Metal replacement handles
  • To replace thermoplastic handles 2 component kit for dual lever enclosures
    • CR 24 ATD
    Anchorages for several earth connections cables, Angled
  • In zinc iron, to be mounted on MIXO frames, in bulkhead mounting housings and high construction hoods
    • CHCW 24
    Cover with 4 pegs
  • For enclosures with 2 levers
    • Toon 30 50 100 per pagina
    1 2 3 4
    Volgende